METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial
User Manual
76-02-082 Rev J
99 of 140
5.5.1.1.4 IP Address
If DHCP is enabled, this will display the IP address served by the DHCP server, or if no
server is available it will have the initial default IP address of 169.254.42.xx where xx is
dependant upon which port the client is defined.
If DHCP is not enabled, enter the IP address for the remote device.
5.5.1.1.5 Network Mask
If DHCP is enabled, this will display the net mask served by the DHCP server, or if no
server is available it will have the default net mask of 255.255.0.0.
If DHCP is not enabled, enter the required net mask for the remote device.
5.5.1.2 Client Mode Proxy
When a device is set to be a Proxy client, it simply needs to be configured for which port
will be used for the proxy management. The client menu is as below:
Metrodata WCM3100 "" Alarms: Major
PROXYING
Mode Client
Interface VCG
First CAPITAL - select item
<escape> - exit menu
5.5.1.2.1 Interface
This toggle menu item selects which interface the proxy mode management will use.
Normally this will be the VCG, as this is the connection to the remote device.
