METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial
User Manual
76-02-082 Rev J
87 of 140
5.3.6 VCG
The VCG ( virtual concatenation group ) configuration menu is used to define the
encapsulation method used for frames being transported over the WAN port.
The VCG configuration menu is as below:
Metrodata WCM3100 "" Alarms: Major
VCG
State Up
Encapsulation <menu>
LCAS/VCAT Off
lcas statUs <display>
layer 2 management <menu>
linK Loss Fwding Disabled
Rate Limiting
<menu>
Counters <display>
First CAPITAL - select item
<escape> - exit menu
5.3.6.1 State
The VCG state setting controls the administrative state of the VCG. For normal operation
the state should be set to UP.
5.3.6.2 Encapsulation
This menu allows the configuration of the packet encapsulation mode for transporting
packets across the WAN port.
Metrodata WCM3100 "" Alarms: Major
ENCAPSULATION, VCG
Encapsulation HDLC
HDLC FCS 16-bit
strip MAC FCS Yes
paYload scrambler Disabled
First CAPITAL - select item
<escape> - exit menu
