Multi LAN 350
General information
9
2.1.4 Factory Calibration, Self Calibration
Factory Calibration
It is essential, that all measuring instruments are regularly calibrated. For occasional
daily use, we recommend an annual factory calibration to be carried out. When the
instrument is used continuously every day, we recommend a factory calibration every
sixth months.
Contact the manufacturer or your local distributor for further information.
Self Calibration (with the Attenuation calibration module )
The test calibration serves to perform a fast check up of the instrument and remote unit
hardware. If using an other remote unit as delivered it is obligatory to perform it.
The calibration can be performed with the Attenuation calibration module ACM-350.
When the instrument is used continuously every day we recommend to perform self
calibration at at least once per month.
The user should run it at least one per month.
Note:
The main and remote unit should be switched on at least 1 minute before performing
the self calibration.
The self calibration should be performed at room temperature.
2.1.5 Service
For repairs under or out of warranty time please contact your distributor for further
information.
Name and address of manufacturer
METREL d.d.
Ljubljanska cesta 77
SI-1354 Horjul
Tel.: +386 1 75 58 200, fax.: +386 1 75 49 226, +386 1 75 49 206)
http://www.metrel.si
E-mail: [email protected]
