Multi LAN 350
Operation
50
Autotest Main menu screen when working with
another MultiLAN350. All selected tests will be
performed.
5.5.3 Testing procedure
Make sure that the Remote unit is connected at the far cable end and that the right
Autotest parameters (test standard, cable type, Autotest type) are set.
Press ENTER to start Autotest. When both units are connected all selected tests will be
performed in succession. Appropriate information and warnings about the currently
running tests are shown on the display.
Refer to chapters 5.8 and 5.11 for information about working with the instrument on the
remote cable side.
At the end of Autotest the overall Pass/Fail decision and Headroom information are
shown on the display. Headroom is the worst case margin that can be used as a
measure of the installation's condition when doing periodic inspections ( view chapter
5.2.2).
The following actions can now be performed:
TEST:
repeat the Autotest
ESC:
return to previous screen
Up/Down :
select a result
VIEW:
the selected measurement result is shown in full details. The
result screens are the same as in Single Test Menu.
SAVE :
saves the Autotest
Complete Autotest overall result screen
