METREL MI 2016 Multi LAN 350 User Manual Download

Page: 70 / 76

Multi LAN 350

Operation

5.13.11

Initial settings

In this menu the following parameters and settings can be set to initial (factory) values:

Test standard, Cable type, Autotest tests

Contrast

Backlight mode

Language

TDR and TDNext settings will be set to default.

Stored Autotest data will stay in the memory.
Stored plots will be deleted.

5.13.12

Factory settings

The factory settings menu is password protected and not accessible to the user.

5.13.13

COM port

In this menu communication port can be selected. After entering this menu the following
actions can be taken:

Up, Down keys

switch between desired communication ports

SET

leave menu and confirm the selected port

ESC

leave menu without changes

If it is possible, use of USB communication is recommended because it is quicker than
RS232 communication. USB port is not supported under Windows 95/95 OSR2/NT 4.0.

Summary of Contents for MI 2016 Multi LAN 350













































































Search results

Summary of Contents for MI 2016 Multi LAN 350

Reviews:

Related manuals for MI 2016 Multi LAN 350

Brands by name

Popular brands

METREL MI 2016 Multi LAN 350, User Manual

Search results

Summary of Contents for MI 2016 Multi LAN 350

Reviews:

Related manuals for MI 2016 Multi LAN 350

Brands by name

Popular brands