Multi LAN 350
Operation
49
Complete cable test when using the Remote unit MultiLAN 350 RU on the far end
When working with the Remote unit MultiLAN 350 RU a complete Autotest consists of
two steps :
1. Near End Autotest
2. Interchange the location of both instruments and perform the Far End Autotest
It is not neccessary to execute both steps one after another. The second test can be
made and stored later.
Each instrument's memory location has two separate segments for the Near End and
Far End tests. The results from a Near End and a Far End tests that are stored in the
same memory location are unified and considered as a complete Autotest.
5.5.2 Selecting the Autotest Type
After the Autotest function is selected with the rotary switch the main Autotest menu is
displayed :
The selected Test Standard and Cable Type are shown in the upper part of the display.
Autotest Main menu screen when working with
the MultiLAN350 Remote unit. The apropriate
type can be confirmed with Up/Down and
started with the ENTER key.
TEST NEAR: perform near end tests
TEST FAR: perform far end tests
