METREL EurotestXD MI 3155 Instruction Manual Download Page 53

Page: 53 / 242

MI 3155

Eurotest

Instrument operation

4.8.6

Opening a Workspace

Procedure



Workspace can be selected from a list in
Workspace manager screen.



Opens a Workspace in Workspace
manager.

The opened Workspace is marked with a
blue dot. The previously opened
Workspace will close automatically.

4.8.7

Deleting a Workspace / Export

Procedure



Workspace / Export to be deleted should
be selected from the list of Workspaces /
Exports.

Opened workspace can’t be deleted.



Enters option for deleting a Workspace /
Export.

Before deleting the selected Workspace /
Export the user is asked for confirmation.

Summary of Contents for EurotestXD MI 3155



















































































































































































































































Search results

Summary of Contents for EurotestXD MI 3155

Reviews:

Related manuals for EurotestXD MI 3155

Brands by name

Popular brands

METREL EurotestXD MI 3155, Instruction Manual

Search results

Summary of Contents for EurotestXD MI 3155

Reviews:

Related manuals for EurotestXD MI 3155

Brands by name

Popular brands