METREL EurotestXD MI 3155, Instruction Manual

Page: 223 / 242

MI 3155 Eurotest XD Appendix B
– Commanders
222
Figure B.2: Front side Plug commander (A 1314)
Figure B.3: Back side
1 TEST
TEST
Starts measurements.
Acts also as the PE touching electrode.
2 LED Left status RGB LED
3 LED Right status RGB LED
4 LEDs Lamp LEDs (Tip commander)
5
Function selector Selects test function.
6
MEM Store / recall / clear tests in memory of instrument.
7 BL Switches On / Off backlight on instrument
8 Lamp key Switches On / Off lamp (Tip commander)
9 Battery cells Size AAA, alkaline / rechargeable Ni-MH
10
Battery cover Battery compartment cover
11 Cap Removable CAT IV cap (Tip commander)
B.4
Operation of commanders
Both LED yellow Warning! Dangerous voltage
on the commander’s PE
terminal!
Right LED red Fail indication
Right LED green Pass indication
Left LED blinks blue Commander is monitoring the input voltage.
Left LED orange Voltage between any test terminals is higher than 50 V.
Both LEDs blink red Low battery
Both LEDs red and switch off Battery voltage too low for operation of commander