METREL EurotestXD MI 3155, Instruction Manual, Page: 238 / 242

MI 3155 Eurotest XD Appendix F
– Programming of AutoSequences

on Metrel ES Manager
237
Operation after end of test
This flow command controls the proceeding of the Auto Sequence
® in regard to the
measurement results.
Parameters
Operation after end of test

pass
 fail

no status
The operation can be individually set for the case the
measurement passed, failed or ended without a status.
Manual: The test sequence stops and waits for
appropriate command (RUN key, external
command
…) to proceed.
Auto: The test sequence automatically proceeds.
Result screen
This flow command controls the proceeding after the Auto Sequence
® has ended.
Parameters

Auto save Auto
Sequence® results are stored in the momentary workspace.
A new Node with the current month and year will be created. Under the
Node Auto
Sequence® results will be stored.
Up to 100 Auto
Sequence® results can be automatically stored under the
same node. If more results are available, they are split to multiple nodes.
Auto Save Flow setting is disabled by default.
Note

This flow command is active only if Auto
Sequence® is started from
the Auto Sequence® Main menu (not from the Memory organizer).