Metek DREXELBROOK Universal IV Lite, Installation And Operating Instructions Manual

Page: 61 / 110

Configuration & Calibration
55
4.3.1 Point Calibration (Continued)
Select Device Setup .
Select Configuration Menu .
Select Calibration .
Select Point Cal - select either Low Point Cal or High Point
Cal depending on whether you plan to raise or lower the level
for your second point—edit value to agree with the present
actual level and return to Point Cal screen. Repeat for second
point or proceed to Capacitance Calibration.
Exit - Calibration is complete.
UNIV.IV: <Tag>
POINT CAL
1. LOW POINT CAL
2. HIGH POINT CAL
UNIV.IV: <Tag>
ENTER LOW POINT CAL
NNNu
XXXu
UNIV.IV: <Tag>
ENTER HI POINT CAL
NNNu
XXXu
UNIV.IV: <Tag>
CAPACITANCE CAL
1. LOWER LEV NNNu
2. LOWER CAP NNNpF
3. UPPER LEV NNNu
4. UPPER CAP NNNpF
UNIV.IV: <Tag>
CALIBRATION
1. STRAPPING TABLE
2. D/A TRIM
3. POINT CAL
4. CAPACITANCE CAL
5. TRUE LEVEL
6. CHNG ANLG LOOP ASGN
UNIV.IV: <Tag>
LOWER LEV
NNNu
XXXu
UNIV.IV: <Tag>
LOWER CAP
NNNpF
XXXpF
UNIV.IV: <Tag>
UPPER LEV
NNNu
XXXu
UNIV.IV: <Tag>
UPPER CAP
NNNpF
XXXpF
From Configuration
Chart
SEE STRAPPING
TABLE CHART
SEE
CONFIGURATION
CHART