Metek DREXELBROOK Universal IV Lite, Installation And Operating Instructions Manual, Page: 28 / 110

Universal IV - Installation and Operating Instructions
22
3.2 Install the Windows Version HRTWin Software
Installation is quite simple.
A. Download the software from www.drexelbrook.com.
B. If program does not "Auto-Run", select the location
where the file was saved and run the set-up program
manually.
C. Follow "On-Screen" instructions in Setup to create
program file.
D. Once loaded, double click "HRTWin" icon and the
program will run under its own window.
E. Select communication port [Com 1, Com 2, etc.] and
then click “OK.” See Figure 3-2.
F. If you are not sure which communication port you are
using (such as when first using a USB modem), select
“Search Ports,” then OK. The software automatically
will seek out the correct one. In either case the
software begins to communicate with the HART protocol
transmitter and returns with a view (below) containing
“name plate data,” Tag ID and all default or existing
configuration information. This is the same as if you
clicked on the Read Transmitter function button.
G. The next view, shown in Figure 3-3 , appears
automatically, displaying current transmitter database
for calibration set-up for your selected Tag ID. The
Scratch Pad will automatically show the last message
(last user, last calibration, etc.) up to 32 characters. If
this is a new transmitter, the Tag ID is user-defined.
Serial number, transmitter software version, range, etc.
is automatically entered from the “name plate data”
embedded in the transmitter:
Figure 3-2
Selecting COM ports during software installation