Metek DREXELBROOK Universal IV Lite, Installation And Operating Instructions Manual

Page: 58 / 110

Universal IV - Installation and Operating Instructions
52
4.2 Configuration
Following is the sequence for Configuration using the HART ®
handheld device.
Select Device Setup.
Select Configuration Menu.
Select Level Config.
Select Level Type - edit Level Type - return to Level
Config screen.
Select Level Units - edit Level Units - return to Level
Config screen.
Select Max Level - edit Max Level - return to Level
Config screen.
Select LRV - edit LRV - return to Level Config screen.
Select URV - edit URV - return to Level Config screen.
Select Damp Time - edit Damp Time - return to Level
Config screen.
Select Chg Anlg Loop Assign - edit Current Loop Assign. If
current loop assign is Level and is correct, go to next screen and
select Exit. Proceed to 4.3 Calibration.
If Vessel configuration is to be selected, choose Vessel, go back
to Config screen and select Vessel Config. Edit all values as
done for Level Config. Select Exit and proceed to 4.4 Calibration.
Note: Changing Units or Analog Loop Assignment during
configuration will initiate an automatic conversion of the values
for LRV, URV,Lower Level and / or Upper Level. It is necessary
to read the transmitter to view the changes