Metek DREXELBROOK Universal IV Lite, Installation And Operating Instructions Manual

Page: 14 / 110

Universal IV - Installation and Operating Instructions
8
2.3 Mounting the Electronic Unit
The Universal IV Series system was designed for field mounting,
but it should be mounted in a location as free as possible
from vibration, corrosive atmospheres, and any possibility
of mechanical damage. For convenience at start-up, mount
the instrument in a reasonably accessible location. Ambient
temperatures should be between -40°F and 167°F (-40°C and
75°C).
The mounting location for the sensing element is often
determined by whether there is a suitable location inside a
vessel. An external side arm or stilling well can be considered.
The following sensing element mounting and installation
instructions should be followed so that the equipment will
operate properly and accurately:
Figure 2-1
Recommended Conduit Installation