Metek DREXELBROOK Universal IV Lite, Installation And Operating Instructions Manual

Page: 30 / 110

Universal IV - Installation and Operating Instructions
24
Point Calibration [F6 on keyboard]
Calibrates the HART® protocol transmitter using known levels.
See Section 3.5 Calibration . Enter the low point and high
point of level for an accurate calibration.
D/A Trim
Allows a field reference meter to be connected to the transmitter
for adjusting transmitter output current.
See Section 3.7.
Configuration Meter
Enable / Disable display options.
See Section 3.8
Strapping Table
Displays the values of the input to level and output to volume
in percent in a 21-point table. Allows points to be changed to
accommodate irregularly shaped vessels.
See Section 3.8.
3.4 Configuration
Refer to Figure 3-3 PC Software Menu Screen.
Configuration involves downloading information to the HART
protocol transmitter that is specific to the application and vessel
that is being measured.
Calibration requires that application information and two points
of level and/or capacitance be supplied to the transmitter from
the calibration software.
Figure 3-4
Configure Transmitter from Menu screen
3.3 Description of Function Keys (Continued)