Metalfire AVENUE MF 1050-40 GHE, Installation And User Manual

Page: 93 / 103

AVENUE_GHE_EN_07
93
6.2.4.3 Setting Time Schedule
Dependent on the choices made in the Installation Menu, 1, 2 or 7 time schedules and II, IV or VI time periods
per day can be set. The setting of the clock programmes is the same for all choices.
Setting a clock programme is as follows:
Press key a few times until the diplay below is shown.
6.2.4.4 Igniting and turning off the second burner unit
The Avenue series is equipped with a second burner unit. When the fireplace is first turned on, both burners are
on.
You can turn the second burner off by holding down the menu button and then pressing the downward arrow key.
You can turn the second burner back on by holding down the menu button and then pressing the upward arrow
key.
The begin time of time period I flashes.
Set the required begin time by pressing keys and
Press key
The current temperature setpoint of time period I flashes. Set the required
temperature setpoint for time period I by pressing keys and .
Press key and repeat the steps above to set the required begin time and
temperature setpoint for all periods and days.
It is also possible to switch off the decorative fire during a set period of time.
To do so, select --,- (appears below 5°C) during the setting of the required
temperature (see the example opposite).
Wait a few seconds or press key to leave the menu.