Metalfire AVENUE MF 1050-40 GHE, Installation And User Manual

Page: 5 / 103

AVENUE_GHE_EN_07
5
2 Introduction
We thank you for your confidence in the Metalfire fireplace that you have purchased. Our products guarantee
many years of heating comfort.
Read these installation and use instructions carefully before starting the installation. Afterwards, you hand them to
the customer.
We advise you to check the appliance upon delivery for any transport damage.
The Avenue range consists of the following models:
AVENUE MF 600-75 GHE
AVENUE MF 700-60 GHE
AVENUE MF 800-75 GHE
AVENUE MF 900-60 GHE
AVENUE MF 1050-40 GHE
AVENUE MF 1050-60 GHE
AVENUE MF 1050-75 GHE
AVENUE MF 1300-40 GHE
AVENUE MF 1300-60 GHE
AVENUE MF 1600-40 GHE
These appliances are closed-circuit gas fireplaces that must be connected to an individual flue that consists of two
concentric pipes. The discharge of flue gases and the supply of combustion air takes place through this pipe
system which can be installed through a wall or roof duct.
These appliances, therefore, operate independently from the air in the room.
It is very important that these gas fireplaces are installed only by a qualified fitter, according to national
and local regulations.
Gas and electricity facilities must be implemented in accordance with national and/or local regulations.