Metalfire AVENUE MF 1050-40 GHE Installation And User Manual Download Page 94

Page: 94 / 103

AVENUE_GHE_EN_07

6.2.5 Installation menu

Select the installation menu as follows:

•

If selected, leave the User menu

•

Then keep key

pressed for ten seconds

In the Installation Menu the following choices can be made:

•

10- or 24-hours time representation

•

Time schedule (1, 5/2, 7days or

)

•

Number of time periods per day (II, IV or VI)

•

Behaviour Wave, Light and Boost function

N.B.: the Installation Menu can be closed by pressing key

or automatically five seconds after the last key

press.

6.2.5.1

12- or 24-hours representation

Press key

a few times until one of the displays below is shown. The current set time representation flashes.

Select the required time representation by pressing key

Wait a few seconds or press key

to leave the menu.

6.2.5.2

Time schedule (1, 5/2, 7 days or

)

Press key

a few times until one of the displays below is shown.

Select the required time schedule (1, 5/2, 7 or

) by pressing key

Time schedule 5/2 is represented by the display showing 1..6.

Wait a few seconds or press key

to leave the menu

N.B.: Choice

means no time schedule is used. Only manually operation with flame height control is now

possible

Summary of Contents for AVENUE MF 1050-40 GHE








































































































Search results

Summary of Contents for AVENUE MF 1050-40 GHE

Reviews:

Related manuals for AVENUE MF 1050-40 GHE

Brands by name

Popular brands

Metalfire AVENUE MF 1050-40 GHE, Installation And User Manual

Search results

Summary of Contents for AVENUE MF 1050-40 GHE

Reviews:

Related manuals for AVENUE MF 1050-40 GHE

Brands by name

Popular brands