Metalfire AVENUE MF 1050-40 GHE, Installation And User Manual

Page: 100 / 103

AVENUE_GHE_EN_07
100
8.2 Registering the remote control again:
Reception sensitivity between the RF remote control and the receiver.
Unplug power supply of fireplace
Hold the menu button down for 10 seconds until the clock flashes in the
upper left corner. Then press the menu button briefly once more. The screen
display as shown in the figure on the left will appear
Re-plug power supply of fireplace
Press both arrow keys at the same time
The registration will begin and the screen display as shown in the figure on
the left will appear. The registration process is running as long as the
hourglass is displayed.
Press the on-off button together with the left arrow key. The screen as
shown in the figure on the left appears.
The strength of the signal reception is displayed.
The signal strength of the remote control is shown in the upper left corner;
the one for the receiver is at the bottom right.
A value of between -20 and -70 is good.
A value of between -80 and -100 is poor.
If necessary, bring the remote control closer to the fireplace.