Metalfire AVENUE MF 1050-40 GHE, Installation And User Manual

Page: 45 / 103

AVENUE_GHE_EN_07
45
5.5 Gas and electricity connection
The fireplace must be connected to the gas type specified on the rating plate on the appliance.
All control components with electrical connections and the ISO7-
R1/2” gas connection are in a separate box that
is connected to the fireplace via flexible gas hoses.
As standard practice, this is connected to the left-hand side of the fireplace.
When ordering, customers have the option of requesting a different layout
If the electricity is connected correctly, a red LED will start to flash slowly on the receiver.
If this LED flashes quickly, the phases in the connector must be swapped.
Installing an approved gas tap is mandatory.
The gas tap and electrical connections must always be set up in such a way that it is possible to access them
after fireplace has been installed.
The connection must be tested to determine leak tightness after connecting the fireplace to the gas supply pipe.