Meta System ARCHIMOD 100, Operating And Maintenance Manual, Page: 24 / 72

3-1
Operating and Maintenance Manual
Safety Provisions
code 5040275001 Rev. September 2010
3. Safety Provisions
3.1 GENERAL NOTES
WARNING
Before doing any operation on the equipment, it is necessary to read through the whole
manual carefully, paying attention to this chapter in particular.
The equipment has been built for the application specified in the declaration of conformity
enclosed with this manual.
For no reason whatsoever it is allowed to use it for purposes other than those for which it has
been designed, nor in ways different to those explained in the manual.
The various interventions must be carried out following the criteria and chronology described
in this manual.
3.2 SYMBOLS
In this manual some operations are highlighted by graphical symbols that call the attention of
the reader to the dangerousness of the operations. The graphics are as follows:
WARNING
This means the possibility of an event happening that could lead to serious injury or great
damage to the equipment if adequate precautions are not taken.
ATTENTION
This means the possibility of an event happening that could lead to
slight injury or material damage if adequate precautions are not taken.
INDICATION
This means important information that must be read paying maximum attention.
3.3 REFERENCE STANDARDS
EN 62040-1-2
PART 1: general provisions and safety recommendations for the UPS
EN 50091-2 EN62040-2
PART 2: EMC provisions
EN 50272-2: Safety provisions for accumulator batteries and their installation