BAM 1020-9800 Manual Rev W.docx
Page 4
1
INTRODUCTION
1.1 About This Manual
This document is organized with the most important information toward the front of the
manual, such as site selection, installation, setups, and field calibrations.
Toward the back are sections that provide in-depth information on subjects such as theory,
diagnostics, accessories, and alternate settings. These sections provide valuable information
which should be consulted as needed. Electronic versions of this manual are also available.
This manual is periodically revised for maximum accuracy, and to incorporate new features or
updates. Below is a brief description of the BAM 1020 manual revision history:
Rev
Released
Manual Description
A-E
1998-2006
Obsolete revisions of the manual. These are only suitable for older BAM 1020 units with
firmware Rev 2.58 or earlier. Users of these units should acquire a newer manual revision.
F
March 2007
Complete re-write of the entire manual to accompany the EPA PM2.5 FEM candidate
modifications for the BAM 1020. Extensively corrected, reorganized, and updated all
sections. Applies to all BAM 1020 units of all vintages. All BAM 1020 units using revision 3.0
or later firmware must have a Rev F or later manual.
G
May 2008
Minor revisions for the official sales release of the EPA designated PM2.5 FEM version of
the BAM 1020. Added final PM2.5 designation requirements and installation drawings.
Other minor revisions throughout the manual. Applies to all BAM 1020 units. All BAM 1020
units using revision 3.2.5 or later firmware should have a Rev G or later manual.
H
June 2010
Revisions to incorporate information about the PM-Coarse designated version, and to add
information about new firmware features up to firmware rev 3.6. Additional maintenance
procedures added.
J
Sep 2011
Minor revisions to zero filter test instructions.
K
Oct 2012
Added electrical safety requirements and smart heater configurations in section 2. Added
report processor and firmware compatibility details. Firmware features up to version 3.7.
L
Dec 2015
Designation update, minor changes to reflect functionality changes
M
June 2016
General Rewrite. Correction of errors, removal of unnecessary information.
N
July 2016
Correction of several formatting errors..
P
Oct 2016
Minor changes to reflect functionality updates.
Q
Feb 2017
Clarification of Zero Background Test instructions..
R
Aug 2017
Correction of minor errors..
T
Oct 2017
Updated replacement parts table..
U
Nov 2017
Minor changes to reflect functionality updates.
W
Feb 2018
Minor changes to reflect functionality updates.
1.2 Technical Service
Technical Service representatives are available during normal business hours of 7:00 a.m. to
4:00 p.m. Pacific Standard Time, Monday through Friday. In addition, technical information
and service bulletins are available from our website. Please contact us at the phone number
or email address below to obtain a Return Authorization (RA) number before sending any
equipment back to the factory.
Phone:
(541) 471-7111
Fax: (541) 471-7116
E-Mail:
Web: www.metone.com