49
8.2.1.3 DDNS
In the Network-Settings-DDNS sub menu, user can select DDNS provider to configure the Dynamic DNS.
To configure DDNS settings:
1. Enable Network-WAN setting. Ensure the WAN networking setting is properly configured and system is able to connect to
internet.
2. Select
ON
to enable DDNS
3. Enter the
Domain Name
.
4. Choose the
user name
and
password
.
5. Click
Apply
to save the settings.
The built-in DDNS allows user to enter messoa-ddns settings.
Prerequistes of messoa-ddns:
1. Enable Network-WAN setting. Ensure the WAN networking setting is properly configured and system is able to connect to
internet. Please refer to 8.2.1.1 WAN Settings.
2. Select
On
to enable DDNS.
3. Input
Built-in DDNS
domain name.
4. Click
Apply
to save the settings.
5. If DDNS is applied successfully, it will pop up
Success
message. If DDNS account is not registered successfully, it will pop
up Failed message. Once it pops up
Failed
message, user needs to check network setting to ensure NVR to internet without
problem. Or users probably use the same domain name as others’ so please use another domain name to register DDNS
account to ensure the registration successfully.
