19
2.2 Add IP Cameras to NVR
2.2.1. Wizard-Full Auto Install Mode (Plug and Play)
There are 6 methods to add IP cameras to NVR. User can use full auto install mode (Refer to 2.2.1 Wizard-Full Auto Install
Mode), Wizard-manual install (Refer to 2.2.2 Wizard-Manual Install Mode), Manual Install (Refer to 2.2.3 Manual Install ),
Discovery (Refer to 2.2.4 IP Camera Discovery) or IP Camera Stream Server (Refer to 2.2.5 Manually Add IP camera by Stream
Server) or by Manually Add Camera by ONVIF(Refer to 2.2.6 Manually Add Camera by ONVIF).
When the first time connect IP cameras to the NVR, the NVR will pop up install wizard window. NVR provides
plug and play
feature if user install specific IP cameras in
Full Auto Install
mode. User just needs to click
Full Auto Install
and then the NVR
will automatically configure IP address of a camera connected by LAN. The NVR will then detect the IP camera and display
image soon.
The connection of the LAN port is for IP cameras. The connection of the WAN port is for the NVR to Internet.
Please click “Full Auto Install” and the NVR will automatically configure IP cameras connected by LAN. After few seconds, the
NVR will detect the IP cameras and display image.
NOTE
NOTE
The connected IP cameras must be integrated IP cameras for NVR to perform plug and play feature.
User can also go to Configuration->System->Device->Install Wizard->Go to bring up Install Wizard.
