36
Click on the PTZ button to enable the PTZ control panel as shown below.
The PTZ control will apply the PTZ command to the current focus camera channel if it’s connected to a PTZ device which
includes RS485 PTZ device or Network PTZ device.
The functions are:
●
8 way pan/tilt control
To pan/tilt the PTZ device to up/down/left/right/up right /up left /down right / down left.
●
Speed
There are five levels of speed (Lowest/Low/Normal/High/Highest) can be applied when press the pan/tilt control.
●
Set
To save the current PTZ position as it’s internal preset position.
●
Go
Go to the preset position
●
Quick Preset 1–10
The quick button to go to the preset positions.
5 PTZ Control
