14
1.5 Remote Control (Optional)
The NVR can be operated through the remote controller. The remote control operation is showing in below figure. Batteries
(2xAAA) must be installed before operating.
1.
ID Button:
Press ID number key to switch to the NVR
that user would like to control. Press a number between 1 and
9 corresponding to the unit ID user wish to control. The user ID
must be set in the device before operating.
2.
Export Button:
Enable/disable Export menu.
3.
F1/F2 Button:
Reserved.
4.
ACK Button:
Alarm acknowledged.
5.
Alphanumeric Buttons
6.
Display Button:
Press to switch the display mode.
7.
Sequence Button:
Press to enable/disable sequence display
mode.
8.
Zoom Button:
For digital zoom in/out operation under digital
zoom mode. Or for zoom in/out control under PTZ mode.
9.
Focus Button:
For focus control under PTZ mode.
10.
PTZ Button:
To enable/disable PTZ control menu.
11.
Direction/Enter Button:
The Direction buttons are used to
navigate the focus display windows or select items in the
menu.The Enter button is used to confirm the selection.
12.
Search Button:
To enable/disable playback mode.
13.
Menu Button:
To enable/disable configuration menu.
14.
Playback Control Buttons:
Same as playback operation on
playback mode.
15.
PTZ control Buttons:
Same as PTZ control operation on PTZ
mode.
