Installation of Car Bed in Vehicle
Page 32
INSTALLATION
1. Install car bed in back seat be-
hind front seat passenger (Fig.
A). (See Pages 24 - 31 for avail-
able seat belt attachment op-
tions).
2. Install car bed with child’s head
toward center of vehicle (Fig.
B).
3. Caregiver position is located in
rear seat on the left side behind
the driver position (Fig. C).
NOTE: A parent or caregiver
must be available for observa-
tion of the child during transit.
4. Car bed leveling straps can be
used to keep car bed level dur-
ing transit (Figs. D and E). For
installation of leveling straps
See Pages 38 and 39.
5. If front seat frame attachments
6.
are not available, the optional
leveling wedge may be used
(See page 39).
Car bed restraint type (Restraint
bag or 3-point harness) and size
must be selected and installed
before the car bed is installed in
the vehicle (See Pages 12 and
13).
D
A
B
C
E
Page 21
4. Repeat step 3 for left side of
cummerbund (Fig. E). It is nec-
essary to compress bottom
cushion to insert metal anchor
on left side of cummerbund.
Insert anchor and lock in place
(Fig. E and F).
5. Figure G shows the cummer-
bund’s metal anchors locked
into place after completing
Steps 1-4.
6.
Replace the 1/2” and 1 ½” side
EPS panel (Figure H).
E
F
G
Attaching Cummerbund and 3-Point Harness, Cont.
ASSEMBLY
H
I
NOTE:
Verify that the 1 1/2” (thicker)
EPS pad is positioned on side of
car bed next to the label in
Figure I—See arrow).