Installation of Car Bed in Vehicle, Cont.
INSTALLATION
Page 34
1. Place the car bed on the vehicle
seat with the vehicle belt path
attachment contacting the vehi-
cle seat back (See Arrow - Fig-
ure A).
NOTE: The car bed must be in-
stalled using two vehicle seat
belts. Each belt can be a “lap
only” or a “lap-shoulder” belt.
Steps 2– 6 demonstrate a lap-
shoulder belt installation.
See Page 36 for Lap Belt Only
2. Grasp the lap-shoulder belt lo-
cated closest to the vehicle
door and pull it down through
the belt slot (nearest the foot
end of the car bed—Figure B) to
its mating buckle (Figure C).
A
C
B
3. Attach the seat belt to the buckle
(Figure C).
Page 19
IMPORTANT
Verify that the shoulder straps are properly connected to the metal
connector plate by pulling the strap as indicated in Figure M.
M
Attaching Cummerbund and Restraint Bag, Cont.
ASSEMBLY
