6
3. Remove the batteries
(9.1)
from the front frame
(1.01)
.
4. Use the screwdriver to loosen battery
’
s screws and nuts with battery
harness
(8.1)
.
5. To replace the new batteries
(9.1)
, then reverse the 4~1 step to
reinstall the scooter.
2.3.
How to replace or repair the
rear section assembly
The rear section assembly includes rear frame, rear shroud, transaxle
assembly, rear wheel assembly.
Note : The step of separate.
When you want to disassemble the front and rear section assembly. You
must proceeding steps as follows.
1. Use the hex. tools to loosen two nuts from the transaxle
(6.1)
and rear
wheels
(2.4A, 2.4B)
.
Then take off two rear wheels.
[see Illus. 08]
2. Use the hex. tools to loosen mounting screw, washers from the release
transaxle fixing bracket
(3.07)
and disk brake
(3.14)
. Then use the hex.
tools to loosen mounting six screws. Then remove the brake disk
(3.15)
and disk brake mounting ring
(3.14)
.
[see Illus. 09]
3. Use the hex. tools to loosen two screws
(3.05)
, nuts
(3.06)
from the
suspensions
(3.04)
and front frame. Then the rear section assembly
will fall down.
[see Illus. 09]
Illus. 08
