2
Use ratchet & socket to loosen four screws
(3.15)
from the bottom of
the seat body assembly, then remove the seat base plate.
[see Illus. 02]
2.1.3. To replace the slide
◆
When you should replace the slide?
◇
If the seat base plate is deformation.
◇
If the seat base plate out of shape due to an accident.
◆
How to replace the slide?
◇
Please proceeding steps as follows if it has to replace.
Use hex. tools to loosen four screws
(3.14)
from the bottom of the seat
body assembly, then remove the slide
(3.12)
.
[see Illus. 02]
2.1.4. To replace seat body
◆
When you should replace the seat body?
◇
If the seat body is worn out.
◇
If the seat body is pierced or scratched by something.
◇
If the scooter crashed cause the seat body out of shape.
◆
How to replace the seat body?
◇
Please proceeding steps as follows if it has to replace.
Follow the following step to disassemble seat body. a) Remove seat
body assembly (see section 2.1.1). b) Use ratchet & socket to loosen
rear two screws
(3.14)
fixed the slide rails
[see Illus. 03]
. c) Pull the
slide swivel lever up, then slide the seat body forward to limit
[see
Illus. 04]
. d) Use hex. tools to loosen the other screws
(3.14)
fixed the
slide rails. Remove the seat body and replace the new one.
Illus. 02
