10
2.4.
How to replace or repair the
f
ront section assembly
The front section assembly includes front frame, front shroud, controller
,
front wheel assembly, carpet, front / rear bumper, steering mechanism,
rear anti-tip assembly. Let the user comfortable drive.
Note : The step of separate.
[see Illus. 11]
When you want to maintain the front section assembly. You must to
disassemble the tiller assembly with front section assembly. You must
proceeding steps as follows.
1. Unplug the tiller
’
s main cable from the controller
.
2. Use the hex. tools to loosen screw, clamp ring. Then take the lower
lever bracket upward from the turn tube assembly.
2.4.1. To replace the front bumper
[see Illus. 12]
◆
When you should replace the front bumper?
◇
If the front bumper out of shape due to an accident.
◇
If the front bumper is deformation.
◆
How to replace the front bumper?
◇
Please proceeding steps as follows if it has to replace.
1. Use the hex. tools to loosen four screws
(1.54)
.
2. Then remove the front bumper
(1.53)
and replace the new one.
Illus. 19
Illus. 11
