14
2.4.7. To replace the steering mechanism
[see Illus. 12]
◆
When should you replace the steering mechanism?
◇
If the steering mechanism out of shape due to an accident.
◇
If the steering mechanism is deformation.
◇
If the steering mechanism has noise.
◇
If the steering mechanism is hard to steer.
◆
How to replace steering mechanism?
◇
Please proceeding steps as follows if it has to replace.
1. Use wrench hex. tools to loosen nut
(1.44)
.
2. Remove the Rod-1.1 and Rod-1.2. If necessary, loosen the nuts
(1.32, 1.33, 1.39, 1.40)
and related parts like a joint
(1.30, 1.31,
1.37, 1.38),
then you can wholly separate Rod-1.1 and Rod 1.2.
3. Use two open-end wrenches to loosen the headset bearing
(1.72)
,
then remove the spindle
with arm.
4. Use two open-end wrenches to loosen two screws
(1.26)
, washers
(1.48)
, and nuts
(1.27)
. Then remove the front suspension ass
’
y LH
(1.23)
and front suspension ass
’
y RH
(1.24)
.
5. Use two hex. tools to loosen two screws
(1.49,1.50)
and
nuts
(1.51).
Then take off front wheel alex
(1.3,1.4)
.
2.4.8. To replace the front frame
◆
When you should replace the front frame?
◇
If your front frame is deformation.
◇
If the front frame out of shape due to an accident.
◆
How to replace the front frame?
◇
Please proceeding steps as follows if it has to replace.
1.Separate front frame and rear frame.
2.Use the hex. tools to loosen screws
(1.75, 1.83, 1.85, 7.04, 7.05,
7.16)
, nuts
(1.84)
from shroud.
[see Illus.12,13]
2. Replace the new one.
2.5.
How to replace or repair the
tiller assembly
The Tiller assembly includes tiller, control units, main harness, shroud,
charger plug-in unit, adjustable component, cable loom and switch.
2.5.1. To remove the tiller assembly
Follow the following step to remove the tiller assembly:
Step: 2.4 Notes 1, 2
[see Illus. 11]
