17
1.Use the hex. tools to loosen two screws
(6.53)
from the front shroud.
2. Remove the indicator light set
(6.51, 6.52)
and replace new one.
2.5.4. To replace the handle bar set
[see Illus. 15]
◆
When you should replace the handle bar set?
◇
If your handle bar set is deformation.
◇
If the handle bar set out of shape due to an accident.
◆
How to replace the handle bar set?
◇
Please proceeding steps as follows if it has to remove.
1. Use the hex. tools to loosen four screws
(5.04)
, nuts
(5.05)
from the
tiller assembly
(5.06)
.
2. Take off the handle bar set
(5.01)
.
2.5.5. To replace the rear-view mirror
[see Illus. 15]
◆
When you should replace the rear-view mirror?
◇
If your rear-view mirror is deformation.
◇
If the rear-view mirror was broken.
◆
How to replace the rear-view mirror?
◇
Please proceeding steps as follows if it has to remove.
1. Use the hex. tools to loosen the rear-view mirror
(5.35, 5.36)
from
the handle bar set
(5.01)
.
2. Remove the rear-view mirror and replace new one.
3. Reverse the steps to reinstall the rear-view mirror.
2.5.6. To replace the elevating cylinder
[see Illus. 15]
◆
When you should replace the elevating cylinder?
◇
If your elevating cylinder is no fuction.
◆
How to replace the elevating cylinder?
◇
Please proceeding steps as follows if it has to remove.
1. Use the hex. tools to loosen the screw
(5.09, 5.10, 5.12)
, washer
(5.08, 5.13, 5.14, 5.15)
from the tiller assembly.
2. Remove the adjustable mechanical lock
(5.07)
and replace new one.
2.5.7. To replace the PCB modular
[see Illus. 15,16]
◆
When you should replace the PCB modular?
◇
If your scooter can
’
t drive.
◇
If the indicator light show error signal sustained.
◇
If the operator has mistake.
◆
How to replace the PCB modular?
◇
Please proceeding steps as follows if it has to replace.
