5
Use two open-end wrenches to loosen hexagon fixed bolt
(1.77)
and
screw
(1.75)
, washer
(1.76)
. Adjust the seat height based
(1.78)
to the
demanded position (there are 5 holes on the tube for adjusting the seat
height). Then insert and tighten the bolt.
2.2.
How to replace or repair the
batteries
The batteries supply the power to drive the scooter. Connect with the
harness and controller.
2.2.1. To replace the batteries
[see Illus. 07]
◆
When you should replace the batteries?
◇
If the battery pack can not charge or batteries seem weak.
◆
How to replace the batteries?
◇
Please proceeding steps as follows if it has to replace.
1. Lift the rear shroud
(4.24)
upward.
2. Untie the battery strap
(7.03)
and unplug the connector of battery
harness
(8.1)
from controller
(1.15)
.
Illus. 07