Copyright Meritor, Inc., 2021
MM-96147 / Revised 03-21
Page 27
(16579)
Printed in USA
5 RPL Series Permalube
4001822e
Fig. 5.38
5. Remove the seal and shroud. Figure 5.39 and Figure 5.40.
4001823a
SEAL
Fig. 5.39
4001824a
SHROUD
Fig. 5.40
Assembly
Slip Yoke
1. Use the grease packet supplied with the slip yoke to apply the
entire amount of grease into the slip yoke. Figure 5.41.
4001826b
Fig. 5.41
2. Use a brush to distribute lubricant on the splines. Figure 5.42.
4001827b
Fig. 5.42
3. Install the new shroud. Figure 5.43.
4001828a
Fig. 5.43
4. Install the new seal onto the spline shaft neck. Ensure that the
small diameter side fi ts onto the splines fi rst. Figure 5.44.