C a l i b r a t i n g
t h e s y s t e m
To start the calibration procedure
Either:
• Press
Next
on the last option of configuring settings; see
To
calibrate the system, page 24.
Or:
• Press
On/Off
to put the digital surround controller into standby.
• Press
More
.
If the product is locked the display shows:
5NLOCK
6ERSION
• Press
Unlock
.
The display shows:
,OCK
#ALIB
6ERSION
)2
7IZARD
• Press
Calib
.
The displays shows
Please wait…
.
After a few seconds the display shows the first calibration test:
Left Level +0.0dB
ìî
ïñ
öõú
óòô
Press More for help
For more detailed information about this and the other calibration
tests see the following sections.
To exit from the calibration procedure
You can exit from the calibration procedure at any time, and any
parameters you have set will be retained:
• Press
On/Off
.
To complete the calibration procedure
When you reach the end of the calibration procedure the following
display confirms that you have completed the calibration of the
system:
Back
Next
Restart
Calibration complete.
• Press
Restart
to restart the calibration procedure, or
Next
to
complete the wizard.
The display shows:
Restart
Back
Exit
Press More for help
Wizard complete
Either:
• Press
Exit
to return to standby.
Or:
• Press
Restart
to return to stage 1; see
Stage 1: Resetting the
product, page 18.
