C a l i b r a t i n g
t h e s y s t e m
0
• Use
>
and
<
to move between each of the speakers in the
layout.
The display shows the speaker being tested, and the distance:
Left Distance 18'0
Units ìî
ïñ
öõú
óòô
Press More for help
• Use
A
and
V
to change the distance.
• You can press
Units
to change between feet/inches and metres.
Repeat this for each of the speakers in your layout.
• Press
>
to proceed to the next calibration stage.
Fine tuning
These tests allow you to fine-tune the phase and delay of each
speaker when used in conjunction with other speakers on the
layout.
• Use
>
and
<
to move between each of the speakers in the
layout.
The first display allows you to adjust the phase. For example:
Left Phase +
ìî
ïñ
öõú
óòô
Press More for help
The next display shows the distance for the same speaker. For
example:
Left Distance 18'0
ìî
ïñ
öõú
óòô
Press More for help
• Choose the correct setting as follows:
Setting
What it sounds like
Correct
The sound between the speakers is very even, and
does not change radically as you move your head.
Incorrect
The sound appears diffused, and changes in timbre
and apparent location as you move your head.
Pay particular attention to the centre channel, as this can have a
dramatic effect on the overall sound.
• Press
>
to proceed to the next calibration stage.
