C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
0
Stage 2: Configuring speakers
The Speakers configuration stage allows you to set up the digital
surround controller for the particular arrangement of loudspeakers
in your system.
To configure the speakers
Either:
• Press
Next
after
resetting the product; see page 18.
Or:
• Press
Wizard
; see page 17.
• Press
Skip
to skip past the
Reset settings
menu.
The display shows the title screen for stage 2:
3KIP
"ACK
%NTER
3ELECTSPEAKERS
0RESS-OREFORHELP
• Press
Enter
to proceed
or
Skip
to go to stage 3.
The display shows the first speaker configuration option:
z{|
wxy
"ACK
.EXT
.UMBEROF3UBWOOFERS
ONE
• Press
Next
or
Back
to step between options.
A description of each option is shown on the top line of the
display, and its current value is shown below this to the right.
The options are summarised in the table on the next page.
To change an option
• Press
A
or
V
to step between the alternative values for the
option.
When you have stepped through all the speaker options the display
shows:
"ACK
.EXT
3PEAKERCHOICEFINISHED
Either:
• Press
Next
on the last option of the last speaker to proceed to
configuring sources, as described in the next section.
Or:
• Press
On/Off
to return to standby.
If you press
On/Off
before completing the configuration a warning
is displayed, giving you the option of continuing or abandoning the
configuration.
