D S P p r e s e t s
TV Logic
TV Logic is a Logic preset based on Pro Logic IIx with the addition
of user-adjustable steering, designed to give higher intelligibility
and a more appropriate spatial presentation for studio-based TV
material.
Mono
In the Mono DSP preset you can choose to listen to:
• Only one of two input channels, such as when different
languages or material are carried on each channel.
• A combined version of the two input channels, such as if the
material was originally mono and has been conveyed on a two-
channel carrier.
If
Party?
is set to
No
, the combined or selected signal is played
only through the centre speaker, or the left and right speakers if
there is no centre, to centrally localise high-frequency hiss and
clicks.
Note:
If
Party?
is set to
Yes
, full range bass is played through any
speakers that are not supplemented by a subwoofer, and this may
damage small speakers at high volume levels.
TV Logic DSP preset parameters
Parameter
Options
What it changes
Roll
Off, Low, Med, Max
The degree of left-right steering.
Yaw
Off, Low, Med, Max
The degree of front-rear steering.
Surrounds
Rear, Side, All
Which of the surround channels are generated by steering.
Mono DSP preset parameters
Parameter
Options
What it changes
Input
Auto L+R, Input L, Input R, Input L+R
The channel selected.
Academy
Off or On
Select
On
to include an equalisation (recommended by Lucasfilm Ltd) to
correct for a high-frequency balance in some old mono films.
Party?
No or Yes
Select
Yes
to play the mono signal through all speakers, including
subwoofers.
