Merida City Bikes Operating Instructions Manual Download Page 87

Page: 87 / 114

Do not overload your MERIDA bike. Follow

the details given in the table in the chapter

“Intended use” and observe the maximum

permissible load printed or imprinted on the pannier

rack.

Adjust the suspension fork and the tire pres-

sure

(e)

to the additional load.

Baggage generally changes the riding char-

acteristics of your MERIDA bike and increas-

es your stopping distance! Therefore, practice

riding a loaded bike in a place free of traffic.

Please contact your MERIDA dealer before

attaching pannier bags to your MERIDA

pedelec.

Taking children with you

The only possible and legal way of transporting children
by bike is in special child seats

(f)

or trailers

(g)

. Contact

your MERIDA dealer.

Only buy tested child seats, child trailers, and

children’s bicycles towing devices (e.g. DIN/

GS tested systems) and ensure that they are

properly mounted. The manuals of the manufacturers

included in the delivery of the system provide detailed

information in this regard.

Child seats

Make sure the child you are taking with you

always wears a suitable helmet. Keep in mind

that you should always wear a helmet, as

well.

Cover the springs of your saddle to make

sure that your child will not have the fingers

pinched.

It is legally permissible to install and use child

carriers on speed pedelecs. Look in the bike

card and ask your MERIDA dealer whether

you are permitted to attach a child seat to your speed

pedelec, and if so, which model.

Please note that your stopping distance in-

creases due to the additional load of the child

seat.

Summary of Contents for City Bikes



















































































































Search results

Summary of Contents for City Bikes

Reviews:

Related manuals for City Bikes

Brands by name

Popular brands

Merida City Bikes, Operating Instructions Manual

Search results

Summary of Contents for City Bikes

Reviews:

Related manuals for City Bikes

Brands by name

Popular brands