85
3.1
Offsets
– Input offsets
3.2
CJ gain
– Gain of cold-junction compensation
3.3
TC neg gain
– Thermocouple negative-gain slope
3.4
TC pos gain
– Thermocouple positive-gain slope
3.5
CJ Correction
– Offset of cold-junction compensation
3.6
DAC coarse gain
– Coarse output DAC gain slope
3.7
DAC fine gain
– Fine output DAC gain slope
3.8
DAC offset –
DAC offset constant
3.9
Full Recal
– Sequences from step 3.1 to step 3.8 and stores all calibration constants.
4.0 Specifications
Input impedance: > 10 megohms
Warm-up time:
≤
1 Minute to full rated accuracy
mV Accuracy:
±
0.025% R + 0.005% FS
Temperature Effect:
≤
2uV/
°
C
T/C Accuracy:
±
0.3
°
C for E, J, K, N & T types
T/C Accuracy:
±
1.0
°
C for B, R & S types
T/C Accuracy:
±
0.5
°
C for C, D, M & P types
Cold junction effect:
±
0.5
°
C max
Resolution:
±
0.1
°
or
±
1
°
for T/Cs,
±
0.001 mV
Voltage range:
±
110.000 mV dc
Temperature: Storage: -40
°
F to 140
°
F (-40
°
C to 60
°
C)
Operating: 23
°
F to 122
°
F (-5
°
C to 50
°
C)
Connector – Measure & Simulate T: standard mini-t/c connector with t/c wire
- Source mV: standard mini-t/c connector with cable and two alligator clips
Power: supplied from MFT (simulate / source mode only)
Units:
°
F,
°
C,
°
R,
°
K, milli-Volts
Weight: 3 ozs
5.0 Approvals
5.1 Intrinsically Safe by MET Laboratories, Inc per CAN/CSA-C22.2 No. 157, CAN/CSA-C22.2 No. 1010.1-92
& UL 913 Fifth Edition, Rev 2/21/97 for Class I, Division I, Groups A, B, C &D Hazardous Areas.
Restrictions apply – see the Intrinsically Safe Control Document in Appendix for more details.
5.2 CE mark
6.0 Accessories for TIO0110
P/N A36857
T/C Wire Kit 1 for types E, J, K, N, T - mini t/c connector, 1 m cable, wire ends
P/N A36858
T/C Wire Kit 2 for types B, K, R - mini t/c connector, 1 m cable, wire ends
P/N A36881
mV simulation cable assembly; mini t/c connector, 3.5 ft. copper cable, alligator clips
1.888.475.5235