Mercury Racing VesselView, Installation, Calibration & Operation Manual

Page: 122 / 190

Section 4 - Main Menu
90-8M8022154 APRIL 2008 Page 115
The "ALARM HISTORY DETAILS" screen will list the details of the alarm.
• The short text defining the alarm will be listed at the top of the screen.
• The long text, listed below the short text, instructs the operator on how to handle the
alarm.
CLEARING ALARM HISTORY
At the bottom of the "ALARM HISTORY DETAILS" screen you can choose to "CLOSE" the
window or "CLEAR HISTORY".
1. Press the
X
button to close the screen or the check button to clear the alarm history.
IMPORTANT: Clearing the alarm history will erase all historic alarms shown in the "ALARM
HISTORY" screen. Active alarms will not be affected.
NOTE: Pressing the
X
button while turning the engine key switch "OFF", a master reset,
or a loss of power to the VesselView will erase all historic alarms.
2. After pressing the check button to clear the history, a pop‑up window will appear asking
you to confirm your selection. Press the
X
button to "CANCEL" or the check button to
"CONFIRM".
ALARM HISTORY DETAILS
27325
3. To exit the alarms screens, press the
X
button.