•
Store the motor in an area which is humid
and weather proof. Ensure that motor is
on a stable surface to prevent falling or
vibration.
•
Remove the transport collar before
installing the motor.
Check Direction of Rotation
Turn on the motor. Verify that the outer drive
head rotates clockwise and the fan rotates
counterclockwise.
A sticker on the motor indicates the correct
rotation direction of the fan.
Mounting the Drive Unit
!
Handle the drive unit with caution
to avoid personal injury and
damage to the equipment.
Do not make any adjustments to
screws and bolts.
There is a powerful magnetic
force between the mixing head
and the outer drive head.
Mount the drive unit onto the vessel following
the instructions for the appropriate mixer size:
GMP 50 ATEX, GMP 100 ATEX and GMP
500 ATEX
1. Install the drive unit into the tank plate.
Put the two studs on the tank plate into the
slots on the drive unit.
2. Turn the drive unit clockwise (view from
below) to the stop position, approximately
15º.
3. Tighten the two nuts with a wrench.
15°
GMP 50,
100, 500
GMP 1000 ATEX and GMP 2000 ATEX
10°
1. Tighten the screws (1) clockwise (view
from below).
12
Installation and User Guide
Summary of Contents for EMD Millipore NovAseptic
Page 2: ...2 Installation and User Guide ...
Page 4: ...4 Installation and User Guide ...
Page 31: ...NovAseptic GMP ATEX Mixer 31 ...
