P 5
28
Pre drill
hole
70mm
screw
Step 4
Parts needed - No. 28 QTY 2
No. 29 QTY 2
Place the starter boards (
No.
28)
and
the first two log boards
(No. 29
) in the notch as shown
onto the assembled base frame
along the longest sides.
Ensure the boards sit square on
the base using the same
method used in Step 1. Meas-
ure corner to corner, making
sure the measurements are
equal.
Once the boards are square, lift
up the log boards
(No. 29
) and
fix the starter boards in place
(
No. 28).
Fix each of the starter boards to
the frame by screwing through
the notch into the frame as
shown in the illustration.
4x70mm Screws
IMPORTANT:
Pre-drill before fixing screws.
29
29
28
28
Step 5
Parts needed - No. 29 QTY 10
No. 32 QTY 12
No. 33 QTY 12
No. 34 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay the
required boards (
No’s. 29, 32,
33 & 34
) onto the starter boards
to create your first level.
*Ensure that the boards are
level and flush with each other
as you lay each one.
33
33
32
29
34
29
32
Rubber Mallet
may be required
to fit parts.
IMPORTANT :
Pre-drill before fixing screws.
7
10
Step 6
Parts Needed - No. 7 QTY 2
No. 8 QTY 2
No. 9 QTY 2
No. 10 QTY 2
Arrange the left, right, top & bottom tall
window frames (
No’s. 7, 8, 9, & 10
) onto a firm
and level surface. Secure the top and bottom
frames to the uprights using 2x80mm screw per
corner, ensuring the screws do
NOT
protrude
through the front of the door framing.
Using the method outlined above, assemble the
two window frames.
16x80mm Screws
Pre drill
hole
80mm
screw
10
8
9
The internal lip of the window
frame should be positioned on
the inside of the building.
8
Please retain product label and instructions for future reference
