P 9
Please retain product label and instructions for future reference
Step 18
Parts needed - No. 29 QTY 1
No. 30 QTY 1
No. 34 QTY 1
No. 35 QTY 1
Following the same method
outlined in
Pre-Assembly
, lay
board (
No. 29)
and the board
that goes above the window
(No. 30
). Afterwards add board
(
No. 34)
and the board that
goes above the door
(No. 35)
onto the log cabin.
*Ensure that the boards are
level and flush with each
other as you lay each one.
30
29
34
35
Rubber Mallet
may be required
to fit parts.
Step 17
Parts needed - No. 29 QTY 6
No. 31 QTY 12
No. 32 QTY 12
No. 33 QTY 12
No. 34 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards
(No’s. 29,
31, 32, 33 & 34)
onto the
log cabin to bring the board
level to the top of the window
and door frames.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame.
31
31
34
29
32
33
33
32
Rubber Mallet
may be required
to fit parts.
Step 16
Once you have laid the second level
of boards onto the log cabin slide the
windows frame
(without main
window)
between the boards
(if you
have not yet assembled the window
frame refer to step 14.)
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may differ
from your choice in product
(
regarding window position
).
Nevertheless the process of fitting the
window is the same.
IMPORTANT:
Pre-drill before fixing screws.
Pre drill
hole
30mm
screw
Step 15
Parts Needed - No. 1 QTY 1
No. 12 QTY 2
Position the window
(No. 1)
so that it
sits centrally within the window
frame. Fix the female part of the flag
hinge
(No. 12)
to the window using
4x30mm screws, attach the male part
of the flag hinge
(No. 12)
to the
window frame using 4x30mm screws
ensuring that the window can open
and close freely.
It is important to fit the windows
within the frame at this stage so that
you can establish the position of the
hinges. The hinges come in two
parts. Remove the window from the
frame after fitting.
*Ensure to attach the hinge to the
horizontal frame of the window*
16x30mm Screws
1
12
12
12
