P 7
Please retain product label and instructions for future reference
Step 9
(See Pre-Assembly)
Parts needed - No. 4 QTY 6
No. 5 QTY 5
No. 10 QTY 6
No. 20 QTY 6
No. 21 QTY 6
No. 22 QTY 6
No. 23 QTY 12
No. 24 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (No’s. 4, 5,
10, 11, 21, 22, 23, 24 & 25) onto
the assembly to bring the board
level to the top of the window
and door frames.
Please note when you get to the
top of the boards the right hand
boards will be slightly lower.
**Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the door
frame.
Step 6
(See Pre-Assembly)
Parts needed - No. 4 QTY 6
No. 5 QTY 6
No. 10 QTY 6
No. 20 QTY 6
No. 21 QTY 6
No. 22 QTY 6
No. 23 QTY 12
No. 24 QTY 6
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (No’s. 4, 5, 10,
20, 21, 22, 23 & 24) onto the
assembly to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the door
frame by 12-13 boards, refer to
door installation instructions, if
not, you can install the door at
step 8.
24
4
23
10
10
23
5
5
21
20
22
23
24
21
20
22
23
4
Step 7
(See Window-Assembly)
Parts needed - No. 1 QTY 3
Refer to window assembly
instructions to assemble
windows.
Step 8
Parts needed - No. 1 QTY 3
Ensure that the lip of the
window frame is located on
the inside of the building .
