IMPORTANT: Pre-drill before fixing screws.
IMPORTANT: Pre-drill before fixing screws.
P 15
Please retain product label and instructions for future reference
HANDLE
WITH CARE
1
2
3
4
Felt
tacks
Step 26
Parts needed - No. 48
Following the individual triangle
shape(
s
) of the roof measure and cut
the felt (No. 48) into the according
sizes and lay onto the roof in the
order shown in the illustration.
Secure along the outer edge of each
felt section using felt tacks spaced
out at approximately 100mm
intervals.
*Ensure there is 50mm of
overhanging felt around the base of
the roof.
600x Felt Tacks
HANDLE
WITH CARE
1
2
3
4
Felt
tacks
1.
3.
2.
4.
5.
6.
7.
8.
9.
10.
Felt Instructions.
1-2
- 5215mm (L) x 1000mm (W)
- 3751mm (L) x 1000mm (W)
3-4
- 3655mm (L) x 1000mm (W)
- 2191mm (L) x 1000mm (W)
5-6
- 3220mm (L) x 1000mm (W)
- 1756mm (L) x 884mm (W)
7-8
- 1660mm (L) x 1000mm (W)
- 928mm (L) x 984mm (W)
9-10
- 2320mm (L) x 1000mm (W)
- 983mm (L) x 436mm (W)
1. 50mmx200mm(W)
2. 50mmx200mm(W)
3. 50mmx200mm(W)
4. 50mmx200mm(W)
5. 50mmx200mm(W)
Step 27
Parts needed - No. 48
Sealing the felt with felt stamps, follow
the measurements below.
250x Felt Tacks
