Please note: You can adjust the
blocks attached to the roof
truss’ if necessary .
IMPORTANT: Pre-drill before fixing screws.
IMPORTANT: Pre-drill before fixing screws.
IMPORTANT: Pre-drill before fixing screws.
P 10
Please retain product label and instructions for future reference
Step 15
Parts needed - No. 30 QTY 1
No. 31 QTY 1
Secure the front Roof Truss’ (No’s. 30
& 31) to the main support as shown
in the illustration using 1x90mm
screws per truss.
*Ensure the angled side of the short
truss is flush with the side of the
long truss. Then make sure the block
under the short truss is flush against
the wall of the building.
** Do not fix roof assembly to the
building at this point.
2x90mm Screws
Pre drill
hole
90mm
screw
Step 17
You can now fix the assembled
roof truss’ to the building,
making sure the attached blocks
sit inside the assembly. Some
adjustment may be required to
ensure the roof structure rests
correctly.
Once in position fix to the
building using 1x120mm screw
per purlin as shown in the
diagram.
13x120mm Screws
27
28
25
Step 16
Parts needed - No. 25 QTY 1
No. 26 QTY 3
No. 27 QTY 3
No. 28 QTY 6
Place the finisher boards (No’s.
25, 26, 27 & 28) around the
building, locating each block
between the truss’.
Secure each board using
2x70mm screws, ensuring to
stagger the screws to avoid
colliding.
26x70mm Screws
Pre drill
hole
70mm
screw
30
31
26
Pre drill
hole
120mm
screw
27
27
28
26
26
28
28
28
28
