Mercedes-Benz S 560 4MATIC, Operator'S Manual

Page: 57 / 506

#
If necessary, slide head restraint 1 upwards
(
/
page 90).
#
Fold up cover 2 of Top Tether anchorage
3 .
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Comply with the
child restraint system manufacturer's instal‐
lation instructions.
#
Guide Top Tether belt 4 under head
restraint 1 between the two head restraint
bars.
#
Hook Top Tether hook 5 of Top Tether belt
4 into Top Tether anchorage 3 without
twisting.
#
Tension Top Tether belt 4 . Comply with the
child restraint system manufacturer's instal‐
lation instructions.
#
Fold down cover 2 of Top Tether anchorage
3 .
#
If necessary, slide head restraint 1 down‐
wards (
/
page 90). Make sure that you do
not interfere with the correct routing of Top
Tether belt 4 .
Securing the child restraint system with the
seat belt
Securing the child restraint system with the
seat belt on the rear seat
When installing a belt-secured child
restraint system, observe the following:
O
Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.
O
When using a category 0/0+ baby car
seat and a category I rearward-facing
child restraint system on a rear seat:
adjust the front seat so that the seat does
not touch the child restraint system.
O The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the rear
seat.
O For certain child restraint systems in weight
category II or III, there may be restrictions
Occupant safety 55