System limits
Full system performance is not available for a
few seconds after switching on the ignition or
after driving off.
The system may be impaired or may not function
in the following situations:
R
In snow, rain, fog, heavy spray, if there is
glare, in direct sunlight or in greatly varying
ambient light.
R
If the sensors are dirty, fogged up, damaged
or covered.
R
If the sensors are impaired due to interfer‐
ence from other radar sources, e.g. strong
radar reflections in parking garages.
R
If a loss of tire pressure or a faulty tire has
been detected and displayed.
R
In complex traffic situations where objects
cannot always be clearly identified.
R
If pedestrians or vehicles move quickly into
the sensor detection range.
R
If pedestrians are hidden by other objects.
R
If the typical outline of a pedestrian cannot
be distinguished from the background.
R
If a pedestrian is not detected as such, e.g.
due to special clothing or other objects.
R
On bends with a tight radius.
%
The Active Brake Assist sensors adjust auto‐
matically while a certain distance is being
driven after the vehicle has been delivered.
Active Brake Assist is unavailable or only
partially available during this teach-in period.
Setting Active Brake Assist
Multimedia system:
4
Vehicle
5
k
Assistance
5
Active Brake Assist
The settings can be adjusted when the ignition is
switched on.
#
Select
Early
,
Medium
or
Late
.
%
Your selection is retained when the vehicle is
next started.
Deactivating Active Brake Assist
%
It is recommended that you always leave
Active Brake Assist activated.
#
Select
Off
.
The distance warning function and the auton‐
omous braking function are deactivated.
Vehicles without Driving Assistance Pack‐
age: when the vehicle is next started, the
medium setting is automatically selected.
Vehicles with Driving Assistance Pack‐
age: Evasive Steering Assist is not available.
When the ignition is next started, the
medium setting is selected automatically and
Evasive Steering Assist is available.
%
If Active Brake Assist is deactivated, the
æ
symbol appears in the status bar of the
multifunction display.
Speed control cruise control
Function of cruise control
Cruise control regulates the speed to the value
selected by the driver.
If you accelerate to overtake, for example, the
stored speed is not deleted. If you remove your
foot from the accelerator pedal after overtaking,
Driving and parking 161
Summary of Contents for S 560 4MATIC
