Mercedes-Benz S 560 4MATIC, Operator'S Manual

Page: 393 / 506

#
Position jack 2 at jack support point 1 .
#
Turn ratchet 3 clockwise until jack 2 sits
completely on jack support point 1 and the
base of the jack lies evenly on the ground.
#
Turn ratchet 3 until the tire is raised a maxi‐
mum of 1.2 in (3 cm) from the ground.
#
Loosen and remove the wheel (
/
page 391).
Removing a wheel
Requirements:
R
The vehicle is raised.
Mercedes-AMG vehicles: observe the notes in
the Supplement. You could otherwise fail to rec‐
ognize dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Unscrew the uppermost wheel bolt com‐
pletely.
#
Screw alignment bolt 1 into the thread
instead of the wheel bolt.
#
Unscrew the remaining wheel bolts com‐
pletely.
#
Remove the wheel.
Installing a new wheel
Mercedes-AMG vehicles: observe the notes in
the Supplement. You could otherwise fail to rec‐
ognize dangers.
Wheels and tires 391